Nikon Forestry Pro Laser Yellow Rangefinder / Hypsometer

$389.95

Description

Measurement range: 10-500 m/11-550 yds./33-999 ft.
In addition to actual distance, horizontal distance, height, angle and vertical separation (difference in height between two targets) measurement functions, three-point measurement (height between two points) is available
The results are displayed on both internal and external LCD panels. The external panel displays all results simultaneously.
Target Priority Switch System for measuring overlapping subjects:
First Target Priority mode displays the distance of the closest subject — useful when measuring the distance to a subject in front of an overlapping background.
Distant Target Priority mode displays that of the farthest subject — useful in wooded areas.
High-quality 6x monocular with multilayer coating produces bright, clear images
Long eye relief design affords eyeglass wearers easy viewing
Dioptre adjustment function
Single or continuous measurement (up to 20 seconds)
Waterproof (up to 1 meter for 10 minutes) but not for underwater usage; the battery chamber is water resistant
Wide temperature tolerance: -10°C to +50°C

Internal display

1. Actual (linear) Distance
2. Horizontal Distance
3. Height
4. Height between two points
5. Three-point measurement
6. Unit of measure (m/yd.)
(No unit displayed for ft.)
7. Target mark( )

8. Laser irradiation ()
9. Battery condition
10. Distant Target Priority mode
11. First Target Priority mode
12. Angle
13. Distance

External display

1. Measurement unit (m/yd./ft.)
2. Height
3. Actual (linear) Distance
4. Horizontal Distance
5. Angle (º)

Measurement example (Three-point measurement: height between two points)

When three-point measurement is achieved, the height between points 2 and 3 is displayed on the internal LCD with Hor Hgt+Hgt2 (solid), and Hgt(2) and Ang(2) are shown on the external LCD. Points 2 and 3 can be reversed.

Measurement example (two-point height measurement)

When the measurement is successful, you see the height from the base to the top displayed on the internal LCD with Hgt + Hgt2 (solid).
For more information, refer to the external LCD.
"Base" and "Top" can be switched.